This Product Is Temporarily Discontinued.

The ultimate glass protection for your windshield, windows, and any glass surfaces.

Ceramic glass protection in a wipe delivery system
Creates an extremely hydrophobic surface for safe driving conditions under inclement weather
2-part system is designed specifically for glass and windshields
Provides one year of protection
DIY, User-Friendly application

Adam’s Ceramic Glass Coating puts a professional grade product in the hands of the everyday consumer. How frustrating can it be to see a durable coating on glass only to be dealer installed? We’ve spent months formulating this system and process to carefully protect, shine, and enhance your windshield’s performance in less than 15 minutes. Adam’s Ceramic Glass Coating is a 2 part ceramic coating system that is only for use on glass surfaces. This carefully applied system ensures the slickest finish and self-cleaning results when applied to contaminant free, clean glass.

Adam’s Ceramic Glass Coating is a two-part chemical application system that must be applied on top of clean, contaminant-free glass. Utilizing the clay bar included in the kit, the pores of your glass become contaminant-free and fully open for a protective coating. Adam’s has historically offered a simple Glass Sealant and Glass Boost to protect your windshield and glass components, but we wanted to achieve a more durable, lasting finish for your investment. Over the course of 6 months, we have identified specific raw materials to carefully react to glass and bond to the pores of your windows, rather than having a sealant or wax that just sits at the surface for a topical solution. Adam’s Ceramic Glass Coating must be applied after carefully reading the instructions-- the installation of the product undergoes a series of reactions that make the glass surface incredibly slick after application.

Part B is a very reactive, hydrophobic barrier that provides slip and slick surfaces-- this bonds to the glass and previously applied part A (ceramic coating) and gives another layer of surface modification with very hydrophobic functionalized and organized groups. Once applied, Part B reacts with the coating and begins to flash/sweat/coagulate with Part A keeping it from further reacting. This allows the product to be less tacky, and easier to remove during the final stage.

During the removal stage, you’ll notice that the coating wipes away clear but begins to flash back almost instantly to give a blue-ish tint or “streak” to your glass-- this is normal. Using the provided Glass Cleaner as a removal agent, the streaks are wiped away and leave your glass streak and residue free.

This product must be used indoors, or under shade and away from direct sunlight. Utilizing a cool-to-the touch surface is critical for application as any heat on the window will shorten your timeline to apply and remove the systems. Adam’s Ceramic Glass Coating can be used by anyone wanting durable glass protection. This two-part system is simple enough to use after reading the instructions that consumers can be back on the road within 15 minutes of application time. Adam’s Ceramic Glass Coating wipes cover a standard size windshield, so purchase additional wipes if you plan on protecting your side, rear, and sunroof glass afterwards… we know you want to!

Frequently Asked Questions:
“How is this better than Glass Sealant/ Glass Boost?” Adam’s Ceramic Glass Coating is a 2-part ceramic coating system that provides much longer durability and hydrophobic properties over our synthetic Glass Sealant and boost. You can see up to 50-60% increases in longevity over Glass Sealant and Boost-- through the system, you can see 1 year of standalone protection, however, proper maintenance of this product will surpass timelines.

“How long does this product last? How often does it have to be maintained?”
The longevity to be expected out of this product is over 1 year with the need for a quarterly or bi-annual maintenance product application. This means a thorough cleaning with Glass Cleaner and the application of more Part B. You will see in the graph that the contact angle upon application is just below 110 degrees (extremely hydrophobic) and after about 30 wash cycles with Dawn Dish Soap, the product is dwindled only down to low 80’s. After boosting with Part B, this number spikes back up to 100 degrees and then can be expected to fall off more rapidly after each consecutive maintenance boost with Part B.

“If my windshield is already coated with Glass Sealant, can I use this product?” Yes! During the cleansing step, the use of a clay bar technically functions as an abrasive with the supplied Glass Cleaner. As you’re preparing your glass, the clay bar will even out the surface leaving behind a flat, open surface for the system to bond to.

“Once applied, how long do I have to wait for the product to cure?” As the system has a timeline of about 15 minutes of installation, you can expect to drive your vehicle in any condition 1 hour after the application.

“If my windshield is already coated with any Ceramic Coating, can I use this product?” Yes! Since this coating is ceramic based, you’re introducing additional ceramic technology to the surface that will bond very well. All that is required is a thorough cleaning, cleansing with a clay bar, and the two-part treatment to be applied.

Kit Contents:
1-Glass Coating Part A, 0.6 mL
1-Glass Coating Part B, 0.6 mL
1-Pair of Nitrile Gloves
1-8 fl oz Bottle of Glass Cleaner
1-Fine Grade Clay Bar
2-Green Glass Towels

In order for this coating to properly bond to the glass surface, it is critical that your glass is clean, smooth, and free of any stuck on debris. Do not apply to a dirty, contaminated windshield.

You are installing a semi-permanent protective layer onto your glass. It is critical that these instructions are followed properly to ensure safe, thorough, and proper installation.

Do not open wipes A & B until ready to perform Steps 3 and 4. While applying the coating wipes, move swiftly and purposefully so that the wipes do not dry out and ultimately make the final wipe down in Step 4 more difficult.

During application, allow Part A to set up on glass for no longer than 1 minute. Do not remove residue as Part B will be applied directly over the top of Part A.

Prep:
1: Clean and clay your glass with the supplied Fine Grade Clay Bar and Glass Cleaner. Fold one of the supplied Green Glass Towel into fourths and wipe away residue.
2: Clean the inside of the window with the supplied Glass Cleaner and Green Glass Towel to ensure any streaks, smudges or smears observed during application steps are easily identifiable as which side of the glass they are on.

Installation:
1: Remove the gloves and wipes A & B. With the gloves on, open Part A and unfold the wipe to begin. Working quickly, wipe the glass from left to right, then up and down overlapping by 25% to maximize coverage. Move quickly and continue onto the other half and repeat. Do not allow Part A to set-up on either side of the glass for longer than 1 minute.
2: With the gloves on, open Part B and wipe over the top of Part A while following the same wiping pattern. When wiping, you’ll notice a fish-eyeing/ “sweating” effect — this is okay as the two-part system is reacting on the surface. Move to the other half and repeat. Ensure a thorough application by continued wiping and leveling of Part B over the entire surface. Allow Part B to flash no longer than 2 minutes.
3: Wipe away residues and buff to a streak-free finish using Glass Cleaner as a removal agent and a fresh, clean Glass Towel. Grabby areas indicate excess material, so continue to wipe the surface until all surfaces are slick. If streaking persists, wipe until clean with Glass Cleaner and Glass Towel. Allow 12 hour of total cure time before exposure to the elements. Refrain from wiper blade use for up to 24 hours.

Discontinued

Adam's Paint Sealant

Ceramic Glass Coating Wipes

Adam's Stainless Steel Cleaner

Adam's Sprayable Compound 16oz

Adam's Seal 02